EasySplicer is a Swedish-made fiber splitting tool, designed for daily use in fiber installations.
With its small size, it fits perfectly into all types of work, and the protected design enables the splice tool to be used in the most demanding environments.

The design of this tool differs a lot from the traditional fiber welds, as EasySplicer is developed for installers and users within the FTTH and LAN market.
EasySplicer is easy to learn to use, and most people are up and running and can join after an hour's review.

EasySplicer works with three buttons, and most installers only need to use the main button to perform the joints. And despite its simple functionality, EasySplicer is accurate and precise, with a typical attenuation of less than 0.05dB on a standard single mode fiber.
Of course, an estimated damping value is given in the display after each splicing, so the user can see if the joint is OK or if it needs to be redone before moving on to the next fiber or the next apartment / house. Similar information is also provided before the actual splice, such as poor cutting, high offset or dirty fiber.

The battery is small but powerful, and allows up to 40 splices (with oven) before it needs to be recharged. And work can be done so clearly because the battery is charged.

EasySplicer calibrates itself continuously during the working day to compensate for environmental changes (such as humidity, air pressure or temperature), but this can also be done manually at eg. beginning of work day or when changing work environment (going from outdoor to indoor). This calibration (or Arc Check) is necessary for EasySplicer to perform splicing with optimal results.

The tool works with V-track technology, which created the prerequisites for the small format, and also makes EasySplicer one of the most cost-effective fiber splitting tools on the market while at the same time performing results in class with welds that are 4-5 times more expensive.

EasySplicer comes as a package with the following content
* EasySplicer with built-in oven
* Fiber hood
* Holder (pair) for 250µm fiber
* Holder (pair) for 900µm fiber
* AC adapter with power cord
* Fiber scaling tongs
* Bag
welding method
  V-groove with loose holders for 250µm and 900µm fiber.
Applicable fiber types SMF, MMF (50 / 125μm and 62.5 / 125μm fiber). 250μm primary and 900μm secondary protected fiber.
Welding program 2 predefined and 6 programmable
Attenuation Below 0.10dB (Typically <0.05dB on SMF)
Times 7 + 50 seconds
Welding sleeves Max 64mm length. The oven supports thicknesses from 2 to 5 mm in diameter.
Communication interface Mini-USB and SD card
Screen 2.8 "color LCD with 320x240 resolution
Magnification 140x
Operating environment 0-40 ° C Max 95% RH, non-condensing
Weight 900g
Power supply 12V DC via supplied 100-240VAC adapter. Built-in Li-Ion battery pack
Battery capacity 40+ cycles (welding & oven)
Other functions Estimated damping Error detection Logging function via SD card